How to set up Employer Locations ( Buildings and Work Areas)
PRINTStep 1: Click on the Location Tab.
Step 2: Click on the “New Building” button at the bottom of the form.
Step 3: Enter the name of the building and its address. If the building doesn’t have a name, then put the street address as an identifier. You may also add county and directions if you wish. Furthermore, if the mailing address is different than the physical address, you can click the “Different” box and add a mailing address.
You will then see that the building has been created.
Repeat these steps to add additional buildings.
In addition, you may include work areas for buildings. Work areas can be a floor in a building, a room number, a location in a hospital such as “3rd Floor West”. It’s up to you to determine what detail will be helpful for your campaigns and Organizers.
How to enter a work area for a building.
In this example we will add two work areas to the West Ogonquin Building on the East Ogonquin Campus. The work areas will be 1st, 2nd, 3rd, 4th, & 5th floors and the Basement.
Step 1: Select the building you want to create the work area for.
Step 2: Click on “+” next to the Work Area.
Fill in the name of the Work Area, and Mail Stop if applicable. You can fill all the work areas you need here.
You will see that the work area is created under the correct building.
